10/100/1000 Copper to Optical Conversion nTAP
|
|
| Technical Specifications |
|
|
| Dimensions |
| Depth |
7.66 in / 19.46 cm |
| Width (faceplate front) |
5.85 in / 14.86 cm |
| Width (back) |
4.55 in / 11.56 cm |
| Height (faceplate) |
1.10 in / 2.79 cm |
|
| Power Reqiurements |
| Specification |
Measurement/Value |
| AC Input |
90 V to 264 V, 47 Hz to 63 Hz |
| Operational Voltage |
5 V (+10% to -5%, < 100 mV ripple) |
| Operational Current |
Typical: <= 1.8 amps |
|
Max: <= 2.8 amps |
| Power Dissipation |
Typical: 8 W |
|
Max: 14 W |
| |
|
|
|
| Supported Media |
| Interface |
Media |
| Link A/Link B (Link under test) |
RJ45 |
| Copper Analyzer Interface |
RJ45 |
| SFP Conversion Analyzer Interface |
SX
850 nm, 1000BaseSX
Multimode
LC connector |
LX
1310 nm 1000BaseLX
Multimode or Single-mode
LC connector |
| |
| Environmental Requirements |
| Specification |
Operational Range |
|
Storage Range |
| Temperature range |
32° to 120°F / 0° to 55 °C |
|
32° - 167°F / 0° - 75°C |
| Humidity |
35-85% (non-condensating) |
| |
| Regulatory Compliance |
| Specification |
Certification |
| Emissions |
FCC Part 15 Class B |
| CE Mark |
EN61000-3-2, EN55024, EN55022A |
