| Copper nTAPs |
 |
10/100 Copper nTAP
- Copies Fast Ethernet traffic from a full-duplex copper link for a copper monitoring device
- Connects to the full-duplex link under test and an analyzer equipped with a dual-receive capture card
more info >> |
 |
10/100/1000 Copper nTAP
- Copies gigabit traffic from a full-duplex copper link for a copper monitoring device
- Auto-negotiates to also support 10 Mb and Fast Ethernet networks
- Connects to the full-duplex link under test and an analyzer equipped with a dual-receive capture card
more info >> |
 |
10/100/1000 Copper to Optical Conversion nTAP
- Copies gigabit traffic from a full-duplex copper link for a copper or optical monitoring device
- Connects to the full-duplex link under test, and a copper or optical analyzer equipped with a dual-receive capture card
more info >> |
| Aggregator nTAPs |
|
10/100/1000 Aggregator nTAP
Transfers network traffic from a full-duplex copper link to a copper analysis or security device.
- The 10/100/1000 Aggregator nTAP
efficiently copies full-duplex traffic and aggregates the traffic into
a single stream to any analysis or security device with a
single-receive capture interface
- Aggregator nTAPs provide greater protection than a SPAN port against packet loss on low-utilization networks
- Choose from a 256 MB or 512 MB buffer
more info >> |
|
10/100/1000 Aggregator Conversion nTAP
Transfers network traffic from a full-duplex copper link to a copper or optical analysis or security device.
- The 10/100/1000 Aggregator Conversion nTAP not only aggregates full-duplex traffic but also can convert that traffic to be analyzed by a copper or optical single-receive analysis or security device.
- Aggregator nTAPs provide greater protection than a SPAN port against packet loss on low-utilization networks
- Choose from a 256 MB or 512 MB buffer
- To connect to an optical device, the nTAP will need SFP modules (sold separately).
more info >> |
| Optical Fiber nTAPs |
 |
One-Channel Optical Fiber nTAP
- Copies traffic from one full-duplex optical link for one optical monitoring device
- Connects to the full-duplex link under test and an analyzer equipped with a dual-receive capture card
- Available in both gigabit and 10 gigabit configurations
more info >> |
 |
Two-Channel Optical Fiber nTAP
- Copies traffic from two full-duplex optical links for two optical monitoring devices
- Connects to two full-duplex links under test and two analyzers equipped with a dual-receive capture card
- Available in both gigabit and 10 gigabit configurations
more info >> |
 |
Three-Channel Optical Fiber nTAP
- Copies traffic from three full-duplex optical links for three optical monitoring devices
- Connects to three full-duplex links under test and three analyzers equipped with a dual-receive capture card
- Available in both gigabit and 10 gigabit configurations
more info >> |
