|
The 10/100 Copper nTAP includes a connection to either side of the full-duplex link under test and a standard full-duplex analyzer connection. All copper nTAPs replicate the full-duplex signal from the network, sending one signal back to the network and the other signal to the monitoring device, which is required to be equipped with a dual-receive capture card.
As with all nTAPs, 10/100 Copper nTAPs are passive, full-duplex monitoring devices, offering complete visibility into the network regardless of traffic levels. nTAPs work with the leading security and network management tools so you can quickly and easily deploy them into the network. And once you install an nTAP, you never need to bring down the link to connect a monitoring device.
All copper nTAPs are transparent, which means you can monitor critical links without data stream interference. Even if power to the nTAP fails, copper nTAPs provide continuous network data flow. Copper nTAPs also work well with redundant-enabled devices. So if the link on one side of the nTAP goes down, the nTAP will automatically bring down the other link, allowing the corresponding device to switch over to a redundant link.
|
Compatibility
Copper nTAPs are compatible with:
- Network/protocol analyzers
- Security monitoring devices
- Forensic tools
- Remote monitoring appliances
- RMON probes
Technology
- 10/100 Copper nTAPs transfer network data at line rate from 10 Mb or 100 Mb full-duplex links to a monitoring device
- Copper nTAPs can be permanently deployed without interfering with network performance or introducing a point of failure
- Copper nTAPs provide continuous network data flow, even if power to the nTAP fails
- Because nTAPs are not addressable devices, they cannot be the target of a hack or virus attack
- Three copper nTAPs can be mounted in a single 1U rack panel
nTAP Advantages
- Economical to install
- Provide full visibility into full-duplex links
- Will not block error packets
- Compact design
- Failover redundancy compatible
- Meets international RF emission standards
|
